Display Adjustment Level (L.4) - Omron E5AR-T User Manual

CH
MV Display Selection
Function
Setting
Bar Graph Display Item
Function
Setting
odsl
• This parameter is used to select which MV is displayed when a PF
Key is set to "Present value (PV)," "Present set point," or "MV" during
heating/cooling control.
• "Heating MV" or "Cooling MV" can be selected.
Setting range
o
: Heating MV
c-o
: Cooling MV
bart
• Use this parameter to select the contents of the bar graph display of
the E5AR-T.
• The bar graph of the E5AR-T is 10 segments.
Setting range
off:
No bar graph display
1eu:
Deviation 1 EU/segment
10eu: Deviation 10 EU/segment
20eu: Deviation 20 EU/segment
100eu: Deviation 100 EU/segment
o:
Standard Control Model: Heating MV
Position-proportional Control Model:
Valve opening
c-o:
Standard Control Model: Cooling MV

8.15 Display Adjustment Level (l.4)

Heating/cooling control
Unit Default value
o
: Heating MV
Unit Default value
o:Standard Con-
l.4
l.4
E5AR-T
trol Models:
Heating MV,
Position-pro-
portional Con-
trol Model:
Valve opening
8-81