Omron E5AR-T User Manual page 269

Section 8 Parameters
CH
Disturbance Gain
Disturbance Time Constant
Disturbance Rectification Band
Disturbance Judgment Width
Function
Setting
Reference
Reference
CH
Set Point Offset
Function
Setting
Reference
Reference
8-32
dogn
dotc
do-b
dojw
These parameters are used to adjust overshooting caused by distur-
bance.
• Disturbance gain is used to adjust the amount of overshooting
caused by disturbance.
Parameter
Disturbance Gain
Disturbance Time Constant
Disturbance Rectification
Band
Disturbance Judgment Width
● Related Parameters
Disturbance Overshoot Adjustment Function (Expansion Control
Setting Level) (P. 8-104)
spof
• This parameter is during coordinated operation to offset the channel
1 set point for program operation.
Monitor range
19,999 to 99,999
● Related Information
Operating Programs Using Multiple Channels in 5.2 Control
Functions (P. 5-11)
● Related Parameters
Set Point Selection (Control Initial Setting Level) (P. 8-62)
Disturbance overshoot
adjustment is enabled
Setting range Unit
1.00 to 1.00
0.01 to 99.99
0.000 to 9.999 %FS
99.99 to 99.99 %FS
Coordinated operation
Unit Default value
EU 0
l.adj
Default value
0.65
1.00
0.000
0.00
l.adj