Omron E5AR-T User Manual page 153

Section 5 Functions and Operations
● Program SP (OFF)/
Fixed SP (ON)
● Program SP
● Remote SP
5-44
• When the event input is ON, the fixed SP (FSP) is used as the SP.
When the event input is OFF, the program SP (PSP) is used as the
SP.
• The Program SP (OFF)/Fixed SP (ON) function creates an operation
command that applies to one specific channel. This function is
disabled, however, for channels 2 to 4 during coordinated operation.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
• When the event input is ON, the program SP (PSP) is used as the
SP. The event input must be reset before this function can be
activated again.
• The Program SP function creates an operation command that
applies to one specific channel. This function is disabled, however,
for channels 2 to 4 during coordinated operation.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
• When the event input is ON, the remote SP (RSP) is used as the SP.
The event input must be reset before this function can be activated
again.
• The Remote SP function creates an operation command that
applies to one specific channel. This function is disabled, however,
for channels that do not support the remote SP function.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
Description
Program SP Mode
Fixed SP Mode
Description
Program SP Mode
Description
Remote SP Mode