Omron E5AR-T User Manual page 151

Section 5 Functions and Operations
● Run (ON)/
Reset (OFF)
● Run (OFF)/
Reset (ON)
● Auto (OFF)/
Manual (ON)
5-42
• When the event input is ON, operation is performed and the Run/
Reset parameter is set to "Run."
• This Run (ON)/Reset (OFF) function creates an operation command
that applies to one specific channel.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
• When the event input is ON, the Run/Reset parameter is set to
"Reset."
• This Run (OFF)/Reset (ON) function creates an operation command
that applies to all channels for coordinated operation and one
specific channel for independent control.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
• When the event input is ON, the mode switches to Manual Mode.
• The Auto (OFF)/Manual (ON) function creates an operation
command that applies to one specific channel.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
Description
Reset
Run (program operation)
Description
Run (program operation)
Reset
Description
Auto
Manual