Using Event Inputs; Event Input Assignments - Omron E5AR-T User Manual

5.8 Using Event Inputs

■ Event Input Assignments

Event Input 1 Assignment
eV.1
10
0
l.2
● Communications
Writing OFF/ON
• An order of priority exists for event inputs, key operation, and
communications settings: The last setting takes priority.
• The operation of event inputs can be switched between pulse
operation (i.e., event occurs only when the input changes from OFF
to ON) and toggle operation (i.e., event occurs either when the input
changes from OFF to ON or from ON to OFF).
• Functions are assigned to event inputs (which use external contact
inputs) using the Event Input Assignment 1 to 6 parameters.
• On a Controller with more than one input, functions can be assigned
for channels 2 and higher for the number of supported channels.
0
Event Input Assignments
l.2
Communications Writing ON/OFF
Event inputs
Channel 1 Program No. (Bit 0, Weight 1)
EV1
EV2
Channel 1 Program No. (Bit 1, Weight 20)
EV3
Channel 1 Run (ON)/Reset (OFF)
EV4
Channel 1 Run (OFF)/Reset (ON)
EV5
Channel 1 Auto (OFF)/Manual (ON)
EV6
EV7 Channel 1 Program SP (OFF)/Remote SP (ON)
EV8 Channel 1 Remote SP (OFF)/Fixed SP (ON)
EV9 Channel 1 Program SP (OFF)/Fixed SP (ON)
EV10
Channel 1 Program SP
Channel 1 Remote SP
Channel 1 Fixed SP
Channel 1 Hold/Clear
Channel 1 Advance
Channel 1 Back
• When the event input is ON, parameters can be written using
communications.
• The Communications Write OFF/ON function creates an operation
command that applies to all channels.
• Operation is as described below based on the ON/OFF status of the
event input.

5.8 Using Event Inputs

All Channels
Channel 1
Channel 2 Back
Channel 3 Back
Channel 4 Back
Channel 2
Channel 3
Channel 4
?????
?????
4
5-39