Omron E5AR-T User Manual page 284

Straight-line Approximation
Straight-line Approximation
Straight-line Approximation
Straight-line Approximation
( : 1 or 2)
Function
Setting
Reference
Reference
si1.
Input 1
si2.
Input 2
so1.
Output 1
so2.
Output 2
Use these parameters to configure straight-line approximation 1 and 2.
• Use these parameter to set the values for straight-line approxi-
mation. Specify two points: straight-line approximations 1 and 2. Use
normalized data for the values.
• If Input 1 = Input 2, the setting will not be effective and will be
regarded as straight-line approximation with input data = output
data.
Output value 2
Output value 1
Input value 1
Parameter
Straight-line Approximation
Input 1
Straight-line Approximation
Input 2
Straight-line Approximation
Output 1
Straight-line Approximation
Output 2
● Related Parameters
Straight-line Approximation 1 Enabled, Straight-line Approximation 2
Enabled (Control Initial Setting 2 Level) (P. 8-71)
8.10 Approximation Setting Level (l.tec)
Straight-line approximation
Input value 2
Setting range Unit
1.999 to
9.999
1.999 to
9.999
1.999 to
9.999
1.999 to
9.999
l.tec
is enabled
Default value
0.000
1.000
0.000
1.000
8-47