Omron E5AR-T User Manual page 152

● Program SP (OFF)/
Remote SP (ON)
● Remote SP (OFF)/
Fixed SP (ON)
• This function is valid only when using control with a remote SP.
• When the event input is ON, the remote SP (RSP) is used as the SP.
When the event input is OFF, the program SP (PSP) is used as the
SP.
• The Program SP (OFF)/Remote SP (ON) function creates an
operation command that applies to one specific channel.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
• When the event input is ON, the fixed SP (FSP) is used as the SP.
When the event input is OFF, the remote SP (RSP) is used as the
SP.
• The Remote SP (OFF)/Fixed SP (ON) function creates an operation
command that applies to one specific channel. This function is
disabled, however, for channels that do not support the remote SP
function.
• Operation is as follows based on the ON/OFF status of the event
input:
Event input
5.8 Using Event Inputs
Description
Program SP Mode
Remote SP Mode
Description
Remote SP Mode
Fixed SP Mode
5-43