Omron E5AR-T User Manual page 252

CH
Run/Reset
Function
Operation
Reference
Reference
CH
Auto/Manual
Function
Operation
Reference
Reference
r-r
• Use this parameter to start and stop program operation.
• The default setting is rst (Reset).
Press the U and D Keys
"Reset" is selected, the RST indicator will light.
● Related Information
4.12 Starting and Stopping Operation (P. 4-41)
● Related Parameters
PF1 Setting and PF2 Setting (Advanced Function Setting Level)
(P. 8-89)
a-m
• Use this parameter to select Auto or Manual Mode.
• The default setting is auto (Auto).
to select auto (Auto) for Auto Mode, or manu
Press the U and D Keys
(Manual) for Manual Mode. When Manual Mode is selected, the MANU
indicator lights.
• This parameter does not appear if either the PF1 Setting or PF2
setting parameter is set to Auto/Manual.
● Related Information
4.13 Manual Operation (P. 4-47)
● Related Parameters
PF1 Setting and PF2 Setting (Advanced Function Setting Level)
(P. 8-89)
8.3 Operation Level ( )
to select run (Run) or rst (Reset). When
PF1 setting
PF2 setting
Auto/Manual
and
Auto/Manual
8-15