Reading Set Values - Omron E5AR-T User Manual

Section 6 CompoWay/F Communications
Variable
Address
type
Ch
"0005" PID Set Number Monitor
"0006" Status
1
"0007" Program Status
"0008" Alarm Set Number Monitor
"C4"
"0105" PID Set Number Monitor
"0106" Status
2
"0107" Program Status
"0108" Alarm Set Number Monitor
Response

■ Reading Set Values

Command
6-18
Monitor value
Parameter name
This command is used to read present values, status, and other
monitor values. The number of elements can be set from 0002 to 0019
to allow reading monitor values in consecutive addresses.
When used in setting area 1, the response for the present value and
internal SP will be 0 and the response for the status will be as
indicated in the notes in E5@R-T Status (Communications) (P. A-8).
MRC SRC Response code
"01" "01" "0000"
Response Codes:
The response for a normal end is shown above. For the
response codes, refer to 6.5 Read from Variable Area (P. 6-10).
Variable
MRC SRC
type
"01" "01"
Variable
Address
type
"0000" to "004F"
"C5"
"C6"
"C7"
"0100" to "014F"
"C8"
"C9"
"0200" to "024F"
"CA"
"CB"
"D8"
"0300" to "034F"
"D9"
Monitor value
Address
Ch Parameter name
"0205" PID Set Number Monitor
"0206" Status
3
"0207" Program Status
"0208" Alarm Set Number Monitor
"0305" PID Set Number Monitor
"0306" Status
4
"0307" Program Status
"0308" Alarm Set Number Monitor
Data
Monitor value
Address Bit position Number of elements
"00" "0001"
Parameters
Ch Description
1 Parameters in setting area 0
Protect Level
Operation Level
2
Adjustment Level
Adjustment 2 Level
Alarm Set Setting Level
3
PID Setting Level
Approximation Setting Level
4
Program Setting Level
Time Signal Setting Level