Omron E5AR-T User Manual page 271

Section 8 Parameters
First Order Lag Operation
( : 1 to 4)
Function
Setting
Reference
Reference
Move Average Move Average Count
( : 1 to 4)
Function
Setting
Reference
Reference
8-34
lagp.*
Time Constant
• These parameters are used to set the time constant of the first order
filter of each input. Data resulting from the first order lag filter is
shown below.
• The filter is used to filter out noise elements in the input.
PV before filter
A
constant
Setting range
0.0 to 999.9
● Related Information
First Order Lag Operation in 5.1 Input Adjustment Functions (P. 5-5)
● Related Parameters
First Order Lag Operation
(P. 8-70)
mrvp.*
• These parameters set the move average count for move averaging
for each input. Data resulting from the movement average is shown
below.
• This function is used to reduce changes in the input due to distur-
bances in the liquid surface when controlling liquid level.
Setting range
1, 2, 4, 8, 16, 32
● Related Information
Movement Average in 5.1 Input Adjustment Functions (P. 5-5)
● Related Parameters
Movement Average
70)
First Order Lag Operation
PV after filter
0.63A
Time
Unit
s
Enabled (Control Initial Setting 2 Level)
Input data
Unit
Number of times
Enabled (Control Initial Setting 2 Level) (P. 8-
l.ad2
Function is enabled
Time
Default value
0.0
l.ad2
Movement Average
Function is enabled
Operation result
Time
Default value
1