Adjustment - Omron E5AR-T User Manual

Section 3 Typical Control Examples
seg.n
Segment Editing
2
01.02
sp
Segment
Set Point
800.0
01.02
time
Segment Time
1.30
01.02
wait
Wait
off
01.02
seg.n
Segment Editing
3
01.03

■ Adjustment

3-6
7. Press the M Key to return to seg.n (Segment Editing). The segment
number will automatically change to 2.
8. Press the M Key to select sp (Segment Set Point). Press the U Key to set
the set point to 800.0.
9. Press the M Key to select tine (Segment Time). Press the U Key to set
the time to 1.30.
10. Press the M Key to select wait (Wait). Make sure the setting is off.
11. Press the M Key to return to seg.n (Segment Editing). The segment
number will automatically change to 3.
Note: Continue repeating the above procedure to set segments 3 to 6.
When finished, press the L Key for less than 1 second to move
to the Operation Level.
To adjust the PID constants, execute autotuning.
For more information, see 4.10 Determining the PID Constants
(AT or Manual Settings) (P. 4-33).