Alarm Latch Cancel; Sp Mode - Omron E5AR-T User Manual

Programmable digital controller

Hide thumbs Also See for E5AR-T:

Table of Contents

■ Alarm Latch Cancel

This command cancels the alarm latch. The command is used when

the alarm latch function is in use.

This command can be used in both setting area 0 and setting area 1.

If AT is being executed for the specified channel, an operation error

To use this command, the communications writing function must be

enabled using the Communications Writing operation command.

Response code

Response Codes:

The response for a normal end is shown above. For the

response codes, refer to 6.7 Operation Commands (P. 6-13).

Remote SP (Close Cascade)

Remote SP (Open Cascade)

6.9 Commands and Responses

Command mode

Alarm Latch Cancel

Command mode