Omron E5AR-T User Manual page 85

Section 4 Settings Required for Basic Control
Program No.
25.0
100.0
01.01
prg
1
01.01
prg
2
02.01
Segment Set Point
and Segment Time
25.0
100.0
01.01
prg.n
2
02.00
seg.n
end
02.00
seg.n
1
02.01
sp
0.0 50.0
02.01
4-28
Use the following procedure to set the program to be executed to 2 in
the Operation Level.
(1) Press the M Key several times to select the Program No. parameter to
enable specifying the number of the program to execute.
(2) Use the U and D Keys to set the program number to 2.
Use the following procedure to set the Segment Set Point and
Segment Time parameters for segments 1 to 4 for program No. 2.
(1) Hold down the L Key for less than 1 second to move from the Operation
Level to the Program Setting Level.
(2) The Program Editing parameter will be displayed in the Program
Setting Level. Select the number of the program to be edited. For
example, to change the Segment Set Point and Segment Time
parameters for program 2, use the U and D Keys to select 2.
(3) Press the M Key twice to display the Segment Editing parameter. Select
the number of the segment to be edited. First, segment 1 parameters will
be edited, so use the U Key to select 1.
(4) Press the M Key for less than 1 second to display the Segment Set
Point parameter for segment 1. Use the U and D Keys to set the
Segment Set Point parameter for segment 1 to 50.0.