Omron E5AR-T User Manual page 242

• When the Initial Setting Protection parameter is set to 2, nothing
happens when the Level Key is held down for 1 second or more to
move to Input Initial Setting Level from Operation Level, Program
Setting Level, Adjustment Level, Adjustment 2 Level, Alarm Set
Setting Level, PID Setting Level, Time Signal Setting Level, Approxi-
mation Setting Level, or Monitor Item Level. (The display will also not
flash to indicate the move.)
• Setting Change Protection
Prevents use of the
Function
Set Changing set values
value using key operations
OFF Enabled
Setting
ON Prohibited
• The Setting Change Protection parameter is set to "OFF" by default.
• PF Key Protection
Prevents use of the PF1 and PF2 Keys.
Function
Set
value
OFF PF1/PF2 Keys are enabled
Setting
PF1/PF2 Keys are disabled (operation as a function key and
ON
channel key is disabled)
• The PF Key Protection parameter is set to "OFF" by default.
8.2 Protect Level (l.prt)
U and D Keys
.
• All parameters in Protect Level
• Move to Advanced Function Set-
ting Level
• Move to Calibration Level
• Program Editing
• Segment Editing
• Display Set Setting Level
• Display PID Selection
Changing set values using key operations
Exceptions
8-5