Communications Writing; Run/Reset - Omron E5AR-T User Manual

Programmable digital controller

Hide thumbs Also See for E5AR-T:

Table of Contents

Section 6 CompoWay/F Communications

■ Communications Writing

Communications Writing Disabled

Communications Writing Enabled

This command is used to enable or disable the communications

writing function. It changes the setting of the Communications Writing

When the communications writing function is disabled, communica-

tions cannot be used to write set values or send operation commands,

such as the Run/Reset operation command.

The default setting is "Communications Writing Disabled."

This command can be used in both setting area 0 and setting area 1.

Response code

Response Codes:

The response for a normal end is shown above. For the

response codes, refer to 6.7 Operation Commands (P. 6-13).

Control state