Omron E5AR-T User Manual page 29

Section 1 Overview
● Auxiliary Output
Assignments
Auxiliary
Auxiliary output assignments
outputs
SUB1 Channel 1 Alarm 1
SUB2 Channel 1 Alarm 2
SUB3 Channel 1 Alarm 3
SUB4 Channel 1 Alarm 4
SUB5
Channel 1 Input Error
Channel 1 RSP Input Error
SUB6
Channel 1 Run Output
SUB7
Channel 1 Program End Output
SUB8
Channel 1 Program Output 1
SUB9
Channel 1 Program Output 2
SUB10
Channel 1 Program Output 3
Channel 1 Program Output 4
Channel 1 Program Output 5
Channel 1 Program Output 6
Channel 1 Program Output 7
Channel 1 Program Output 8
Channel 1 Program Output 9
Channel 1 Program Output 10
1-12
For linear current outputs, 0 to 20 mA or 4 to 20 mA can be selected.
Pulse voltage outputs are 12 VDC, 40 mA.
Outputs
Multi-output output type
OUT1
Pulse Voltage Output
OUT2
Linear Current Output
OUT3
OUT4
The type of data that is output from each auxiliary output can be
assigned.
For models with more than one input, assignments can be made for
channels 2 and higher as needed depending on the number of
channels.
The U-ALM output is an OR output of alarm functions 1 to 4 for all
channels.
Channel 1
2
Linear current output, output type
0 to 20 mA
4 to 20 mA
3
4
Alarm 1 OR output of all channels
Alarm 2 OR output of all channels
Alarm 3 OR output of all channels
Alarm 4 OR output of all channels
Input Error OR output of all channels
RSP Input Error OR output of all channels
U-ALM Output
All Channels