Omron E5AR-T User Manual page 97

Section 4 Settings Required for Basic Control
1 5bo.2
2
l.2
1 5bo.2
1
l.2
Alarm 1 Type
alt1 Alarm 1 type
1
2
l.3
1 alt1
3
l.3
Alarm Value
1 25.0
0.0
01.01
1 d.alm
1
l.alm
Alarm Set 1
1 1.al-1
Alarm Value 1
0.0
10.0
U
l.alm
4-40
4. Press the D to set the Auxiliary Output 2 Assignment parameter to 1 (CH
1 Alarm 1).
Set Alarm 1 Type parameter to a "Lower-limit Alarm" in the Alarm
Setting Level.
5. Press the L Key for less than 1 second to move to the Alarm Setting
Level.
The display will show the Alarm 1 Type parameter.
6. Press the U Key to select 3 (Lower-limit Alarm).
Set the Alarm Set Alarm Value 1 parameter to 10.0°C in the Alarm Set
Setting Level.
7. Hold down the L Key for at least 1 second to move to the Operation Level.
8. Press the L Key three times (less than 1 second each time) to move to the
Alarm Set Setting Level.
9. Press the M Key repeatedly to select the Alarm Set 1 Alarm Value 1
parameter.
Press the U Key to change the set value to 10.0.