Omron E5AR-T User Manual page 291

Section 8 Parameters
Sensor Induction Noise Reduction
Function
Setting
Reference
Reference
Move to Advanced Function Setting Level
Function
Setting
Reference
Reference
8-54
snc
This parameter can be set to reduce induction noise from the power
source in the input.
• This parameter reduce induction noise in the input according to the
frequency of the power source.
• Select 50 Hz or 60 Hz according to the power source used for the
Controller.
Setting range
50hz: 50 Hz
60hz: 60 Hz
● Related Information
Input type (Input Initial Setting Level) (P. 8-50)
amov
This function is used to move to the Advanced Function Setting Level.
• Enter a password to move to the Advanced Function Setting Level.
• The password is set to " 169." After entering " 169," press the M
Key or wait for two seconds and you will move to Advanced Function
Setting Level.
Setting range
1999 to 9999
● Related Parameters
Initial Setting Protection (Protect Level) (P. 8-4)
Unit Default value
50hz: 50 Hz
"Initial Setting Protection" is set to 0.
Unit Default value
0
l.0
l.0