Omron E5AR-T User Manual page 341

Section 8 Parameters
CH
Operation at Potentiometer Input Error
Function
Setting
Reference
Reference
CH
Disturbance Overshoot Adjustment Function
Function
Setting
Reference
Reference
8-104
pmec
• This parameter is used to select whether control is stopped or
changed to floating control when a potentiometer error occurs during
closed position-proportional control.
Setting range
off: Stop
on:
Continue
● Related Parameters
Closed/Floating (Control Initial Setting Level) (P. 8-59)
dost
• This parameter is used to enable or disable disturbance overshoot
adjustment.
Setting range
off: Disabled
on: Enabled
● Related Information
Disturbance Overshoot Adjustment in 5.2 Control Functions (P. 5-13)
Position-proportional Control Model
Unit Default value
off: Stop
Unit Default value
off: Disabled
l.exc
Closed control
l.exc