Omron E5AR-T User Manual page 257

Section 8 Parameters
CH
Alarm Set Number
Function
Setting
Reference
Reference
CH
Wait Band Upper Limit
Wait Band Lower Limit
Function
Setting
Reference
Reference
8-20
alm
• This parameter is used to set the alarm set number for each
program.
• If this parameter is set to 0 for channels 2 to 4 when using coordi-
nated operation or for the secondary side (channel 2) when using
cascade control, the alarm set number selected for channel 1 will be
used for the other channels.
Setting range
1 to 4 (See note.)
Note:The setting range is 0 to 4 for channels 2 to 4 when using coordi-
nated operation and for the secondary side (channel 2) when
using cascade control. The default is 0.
● Related Information
8.7 Alarm Set Setting Level (P. 8-36)
wtbh
wtbl
These parameters are used to set the wait operation.
• The Wait Band Upper Limit parameter is used to set the upper
deviation for the wait operation.
• The Wait Band Lower Limit parameter is used to set the lower
deviation for the wait operation.
• The wait function will not operate if the wait band is set to 0.
Parameter
Wait Band Upper Limit 0 to 99,999 (0: OFF)
Wait Band Lower Limit 0 to 99,999 (0: OFF)
● Related Information
Wait in 5.7 Program Operation Functions (P. 5-32)
● Related Parameter
Wait Mode (Expansion Control Setting Level) (P. 8-96)
Alarm function enabled
Unit
- 1 (See note.)
CH1 or CH 2 for independent operation
Setting range Unit
EU
EU
Default value
Default value
0: OFF
0: OFF