Setting Lists - Omron E5AR-T User Manual

Appendix

Setting Lists

The setting lists give the addresses for CompoWay/F communications and Modbus communications.
Refer to the addresses of the protocol that you are using.
The hexadecimal values in the Setting/monitor value column are the setting ranges in CompoWay/F and
Modbus communications, and the values in parentheses ( ) are the actual setting ranges.
Monitor and set values can be specified for each channel. Addresses include a channel identifier. The
addresses in the variable area maps are for channel 1. To specify addresses of other channels on a
Controller with more than one input channel, refer to the table below.
Channel
1 Address in setting list
2 Address in setting list + 0100
3 Address in setting list + 0200
4 Address in setting list + 0300
A-6
CompoWay/F
Address
Modbus
Address in setting list
Address in setting list + 4000
Address in setting list + 8000
Address in setting list + C000