Omron E5AR-T User Manual page 328

CH
PF1 Monitor/setting Item 1 to
PF1 Monitor/setting Item 5
PF2 Monitor/setting Item 1 to
PF2 Monitor/setting Item 5
Function
Setting
Reference
Reference
8.17 Advanced Function Setting Level (l.adf)
pf1.1 to pf1.5
pf2.1 to pf2.5
• When one or both PF Keys are set to "Monitor/setting item," the
Monitor/Setting Item 1 to Monitor/Setting Item 5 parameters for each
key must be set according to the following table.
• Each time a PF Key is pressed, the display scrolls to the next
monitor/setting item in order from the item set for the Monitor/Setting
Item 1 parameter to the item set for the Monitor Setting Item 5
parameter.
Setting
off:
PF1 Monitor/
Disabled
Setting Item 1 pvsp: PV/Present Set Point/MV
(settable) (Fixed SP)
PF1 Monitor/
pvdv: PV/DV (monitor only)
Setting Item 2
segr: Remaining Segment Time
PF1 Monitor/
Monitor (monitor only)
Setting Item 3
p:
Proportional Band (P)
PF1 Monitor/
(settable)
Setting Item 4
i:
Integral Time (I) (settable)
PF1 Monitor/
d:
Derivative Time (D) (settable)
Setting Item 5
al-1: Alarm 1 (settable)
al1h: Alarm Upper Limit 1 (settable)
PF2 Monitor/
al1l: Alarm Lower Limit 1 (settable)
Setting Item 1
al-2: Alarm 2 (settable)
PF2 Monitor/
al2h: Alarm Upper Limit 2 (settable)
Setting Item 2
al2l: Alarm Lower Limit 2 (settable)
PF2 Monitor/
al-3: Alarm 3 (settable)
Setting Item 3
al3h: Alarm Upper Limit 3 (settable)
PF2 Monitor/
al3l: Alarm Lower Limit 3 (settable)
Setting Item 4
al-4: Alarm 4 (settable)
al4h: Alarm Upper Limit 4 (settable)
PF2 Monitor/
al4l: Alarm Lower Limit 4 (settable)
Setting Item 5
● Related Parameters
PF1 Setting and PF2 Setting (Advanced Function Setting Level)
(P. 8-89)
PF Key set to monitor/setting item
Setting range
l.adf
Default
Unit
value
pvsp:
PV/
Present
Set Point/
MV (set-
table)
(Fixed
SP)
8-91