Omron E5AR-T User Manual page 320

Start Display Scan after Power ON
Display Scan Period
Function
Setting
sc-m
sc-t
• The display scan automatically switches through channels on the
display when multiple channels are used on a Controller with more
than one input.
• The display scan shows only channels that are enabled using the
Number of Enabled Channels parameter.
• The display scan can be started automatically after the power is
turned ON or by pressing the
• To have display scan start automatically after the power is turned
ON, set the Start Display Scan after Power ON parameter to ON.
• The display scan period is set in the Display Scan Period parameter.
If the period is set to 0, the display scan is disabled.
Parameter
off
Start Display Scan
on
after Power ON
: Enable
0 to 99
Display Scan Period
(0: Display scan disabled.)
8.15 Display Adjustment Level (l.4)
Controller with more than one input
Key.
CH
Setting period Unit
: Disable
s
l.4
Default value
off: Disable
2
8-83