Section 5 Functions and Operations
5.2 Control Functions
■ Alarm Sets
● Alarm Values
Alarm Set 1 Alarm Value 1
1
1.al-1
0.0
l.alm
Alarm Set 1
Alarm Upper Limit 1
1
1.al1h
0.0
l.alm
Alarm Set 1 Alarm Lower Limit 1
1
1.al1l
0.0
l.alm
● Procedure
Operation Level
1
25.0
0.0
01.01
5-8
• Up to 4 alarm sets with registered alarm values can be created.
Alarm set number
Alarm Values 1 to 4
Alarm Upper Limits 1 to 4
Alarm Lower Limits 1 to 4
• The alarm values for alarms 1 to 4 are set according to the alarm
type. Alarms for which the Alarm Type parameter is set to 0 ("No
Alarm") will not be displayed.
• Refer to 4.11 Using Auxiliary Outputs (P. 4-37) for information on
how to set parameters.
• The first number in the setting is the alarm set number.
This section describes how to set the Alarm Set 2 Alarm Value 1
parameter. The settings in the following table are used as an example.
Alarm set number
Alarm Value 1
Operation Level (PV/SP)
1
2
• • •
240.0
300.0
40.0
30.0
40.0
30.0
1
2
• • •
250.0
4
4