Section 8 Parameters
Communications Data Length
Function
Setting
Communications Stop Bits
Function
Setting
Communications Parity
Function
Setting
8-86
len
• After changing the communications data length setting, execute a
software reset or turn the power OFF and ON to make the change
effective.
Setting range
7 to 8
sbit
• After changing the communications stop bit setting, execute a
software reset or turn the power OFF and ON to make the change
effective.
Setting range
1 to 2
prty
• After changing the communications parity setting, execute a
software reset or turn the power OFF and ON to make the change
effective.
Setting range
none: None
even: Even
odd: Odd
Protocol is CompoWay/F
Unit
Default value
Bits
7
Protocol is CompoWay/F
Unit
Default value
Bits
2
Unit
Default value
even: Even
l.5
l.5
l.5