Omron E5AR-T User Manual page 309

Section 8 Parameters
Broken-line Approximation 1 Enabled
Function
Setting
Reference
Reference
CH
Motor Calibration
Function
Operation
Reference
Reference
8-72
fnc.1
• Use this parameter to enable or disable broken-line approximation
for input 1.
Setting range
off: Disable
on: Enable
● Related Parameters
Broken-line Approximation 1 Input 1 to Broken-line Approximation 1
Input 20, Broken-line Approximation 1 Output 1 to Broken-line
Approximation 1 Output 20 (Approximation Setting Level) (P. 8-48)
calb
• Use this parameter to execute motor calibration. If you are going to
monitor the valve opening, be sure to execute this parameter.
(During execution the display cannot be changed.)
• Executing this parameter also resets the Travel Time parameter.
• When this parameter is accessed, the set value is off.
• Select on to execute motor calibration.
• When motor calibration ends, the setting automatically reverts to
off.
● Related Parameters
Travel Time (Control Initial Setting 2 Level) (P. 8-73)
Unit Default value
off: Disable
Position-proportional Control Model
l.2
l.2