Omron E5AR-T User Manual page 282

CH
Time Signal * ON Time 1
Time Signal * ON Time 2
Time Signal * ON Time 3
(*: 1 to 6)
Function
Setting
Reference
Reference
CH
Time Signal * OFF Time 1
Time Signal * OFF Time 2
Time Signal * OFF Time 3
(*: 1 to 6)
Function
Setting
Reference
Reference
ton*.1
ton*.1
ton*.1
• These parameters are used to set the ON time for time signals.
• Set the interval between the time signal ON and OFF times to
100 ms minimum. Unexpected operation may occur if the interval
is set to less than 100 ms.
Setting range
0.00 to 99.59 or 0.00.0 to 99.59.9
● Related Information
Time Signal in 5.7 Program Operation Functions (P. 5-33)
● Related Parameters
Auxiliary Output * Assignment (Control Initial Setting 2 Level) (P. 8-
67)
Program Output Selection (Control Initial Setting 2 Level) (P. 8-68)
Time Signal * Set Segment * (Time Signal Setting Level) (P. 8-44)
Time Signal * OFF Time * (Time Signal Setting Level) (P. 8-45)
tof*.1
tof*.1
tof*.1
• These parameters are used to set the OFF time for time signals.
• Set the interval between the time signal ON and OFF times to 100
ms minimum.
Unexpected operation may occur if the interval is set to less than
100 ms.
Setting range
0.00 to 99.59 or 0.00.0 to 99.59.9
● Related Information
Time Signal in 5.7 Program Operation Functions (P. 5-33)
● Related Parameters
Auxiliary Output * Assignment (Control Initial Setting 2 Level) (P. 8-
67)
Program Output Selection (Control Initial Setting 2 Level) (P. 8-68)
Time Signal * Set Segment * (Time Signal Setting Level) (P. 8-44)
Time Signal * OFF Time * (Time Signal Setting Level) (P. 8-45)
8.9 Time Signal Setting Level ( )
CH1 or CH2 (during independent
control) with time signal enabled
Unit Default value
Program time unit 0.00
CH1 or CH2 (during independent
control) with time signal enabled
Unit Default value
Program time unit 0.00
8-45