Omron E5AR-T User Manual page 272

Extraction of Square Root * Low-cut Point
Function
Setting
Reference
Reference
Analog Parameter 1 (Control Rate)
Function
Setting
Reference
Reference
sprp.*
• These parameters are used to set the low-cut point of each input.
Data resulting from the extraction of square root operations is shown
below.
• This function is used for extraction of square root operations for
liquid sensors.
Operation result
Low-cut point
Setting range
0.000 to 9.999
● Related Information
Extraction of Square Root in 5.1 Input Adjustment Functions (P. 5-7)
● Related Parameters
Extraction of Square Root
(P. 8-71)
ap.1
This parameter sets the ratio used for proportional control.
Setting range
1.999 to 9.999
● Related Information
Position-proportional Control in 4.6 Selecting the Control Mode (P. 4-
18)
● Related Parameters
Control Mode (Control Initial Setting Level) (P. 8-58)
8.6 Adjustment 2 Level (l.ad2)
Extraction of Square Root *
Function is enabled
Argument 1 (input data)
Unit Default value
0.000
Enabled (Control Initial Setting 2 Level)
Proportional control
Unit Default value
1.000
l.ad2
l.ad2
8-35