Omron E5AR-T User Manual page 155

Section 5 Functions and Operations
● Back
5-46
• When the event input is ON, the program returns to the start of the
current segment being executed. The event input must turn OFF
once before this function can be used again.
• The back function creates an operation command that applies to
one specific channel. During coordinated operation, however, the
operation command applies to all channels.
• This function is enabled only during program operation.
• Operation is as follows based on the ON/OFF status of the event
:
input
Event input
Display
Parameter names
characters
Event Input 1 to 10
ev.
Assignment
: 1 to 10
Description
Back Mode
Level
Use
(Display No. 3)
Control Initial
Event input
Setting 2 Level
specification
(l.2)