Omron E5AR-T User Manual page 329

Section 8 Parameters
Number of Enabled Channels
Function
Setting
Reference
Reference
RAM Write Mode
Function
Setting
Reference
Reference
8-92
ch-n
• This parameter is used to set the number of enabled channels when
using multiple channels on a Controller with more than one input.
Setting range
1 to 4
* The default value and setting range depend on the control mode
setting of the Controller with more than one input.
2-input model: Proportional control, standard control with remote SP,
heating/cooling control with remote SP: 1
Other modes: 2
4-input model: 4
● Related Parameters
Start Display Scan after Power ON and Display Scan Period
(Display Adjustment Level) (P. 8-83)
ramm
• Use this parameter to select the write mode.
Write mode
When writing set values to setting area 0 by
Backup Mode communications, the data is also written to internal
EEPROM.
When writing set values to setting area 0 by
communications, the data is not written to internal
RAM Write Mode
EEPROM. However, changes to set values made by
key operation are written to EEPROM.
• When the write mode is changed from RAM Write Mode to Backup
Mode, the set values in setting area 0 are written to internal
EEPROM.
Setting range
bkup: Backup Mode
ram: RAM Write Mode
● Related Information
5.10 Using Communications (P. 5-49)
Controller with more than one input
Unit Default value
*
Explanation
Unit Default value
bkup: Backup Mode
l.adf
l.adf