Omron E5AR-T User Manual page 296

CH
Closed/Floating
Function
Setting
Independent Operation/
Coordinated Operation
Function
Setting
Reference
Reference
clfl
• Use this parameter to select the control method for a Position-
proportional Control Model.
Setting range
float: Floating
close: Closed
pmod
• This parameter can be used to select independent or coordinated
operation for models with two input channels.
• If coordinated operation is selected, coordinated operation based on
channel 1 is enabled. The program will be the same for channels 1
and 2.
Setting range
mult: Independent operation
sngl: Coordinated operation
● Related Information
Operating Programs Using Multiple Channels in 5.2 Control
Functions (P. 5-11)
● Related Parameters
Set Point Offset (Adjustment Level) (P. 8-32)
Set Point Selection (Control Initial Setting Level) (P. 8-62)
8.12 Control Initial Setting Level (l.1)
Position-proportional Control Model
Unit Default value
float: Floating
CH2 standard control or
CH2 heating/cooling control
Unit Default value
mult: Independent operation
l.1
l.1
8-59