Omron E5AR-T User Manual page 285

Section 8 Parameters
Broken-line Approximation 1 Input 1 to
Broken-line Approximation 1 Input 20
Broken-line Approximation 1 Output 1 to
Broken-line Approximation 1 Output 20
Function
Setting
Reference
Reference
8-48
fi01.1 to fi20.1
fo01.1 to fo20.1
Use these parameters to set values for broken-line approximation 1.
• Use these parameters to set the values for broken-line approxi-
mation. Up to 20 points can be specified for one broken line approxi-
mation. Use normalized data for the values.
• If Input n Input n + 1, the setting of point n + 1 will not be effective.
Operation result
P5 disabled because
Input 5 Input 4
Output 3
Output 2
Output 1
P1
Input 1
P7 to 20 Input 2
(Disabled)
Parameter
Broken-line Approximation
Input 1 to
Broken-line Approximation
Input 20
Broken-line Approximation
Output 1 to
Broken-line Approximation
Output 20
● Related Information
Broken-line Approximation in 5.1 Input Adjustment Functions (P. 5-6)
● Related Parameters
Broken-line Approximation 1 Enabled (Control Initial Setting 2 Level)
(P. 8-72)
Broken-line Approximation 1
P5
P6
P4
P3
6-point broken-line approximation characteristics
P2
Input 3 Argument 1 (Input data)
Setting range Unit
1.999 to
9.999
1.999 to
9.999
l.tec
is enabled
Default value
0.000
0.000