Composite Read Registration Confirmation; Composite Registration Read - Omron E5AR-T User Manual

■ Composite Read Registration Confirmation

Command
Response

■ Composite Registration Read

Command
Response
MRC SRC
"01" "12"
This command is used to check the contents that were stored using
the Composite Read Registration command.
MRC SRC Response code Variable type
"01" "12" "0000"
Response Codes:
The response for a normal end is shown above. For the
response codes, refer to 6.5 Read from Variable Area (P. 6-10).
MRC SRC
"01" "10"
This command is used to read the monitor values and set values that
were registered using the Composite Read Registration command.
This enables reading multiple monitor values and set values with one
command.
This command can be used in both setting area 0 and setting area 1.
If an area type error or a set value error occurs in any of the data being
read, no data will be read.
MRC SRC Response code Variable type
"01" "10" "0000"
Response Codes:
The response for a normal end is shown above. For the
response codes, refer to 6.5 Read from Variable Area (P. 6-10).
6.9 Commands and Responses
Read address
Type
Variable type Read address Bit position
Type
"00"
Data
Type
Monitor value/Set value
Variable type Data
Type
Monitor value/Set value
6-25