Omron E5AR-T User Manual page 65

Section 4 Settings Required for Basic Control
1. Power ON
2. Input specification
setting
3. Control mode setting
4. Alarm type setting
4-8
Power ON
Operation Level
25.0
Present Value (PV)/SP
0 0
.
Program No. or Segment No.
01.01
Hold down for at least 3 seconds.
M
Display No. 3 will show l.0 (Input Initial Setting Level).
Control stops Control stops
Input Initial Setting Level
i1-t
Input 1 Type
Input type is
2
2: K(1) 200.0 to 1300.0 C
displayed
l.0
UD
Input Initial Level
Change the input i1-t
Input 1 Type
type with the U
0
2 0: Pt100(1) 200.0 to 850.0 C
l.0
and D keys.
Press less than 1 second.
M
Display No. 3 will show l. 1 (Control Initial Setting Level).
Control Initial Setting Level
o1-t
Check the output
Output 1 Type
0
type. 0: Pulse voltage output
l . 1
M
mode
Control Mode
Check the control
0
0: Standard control
mode.
l . 1
Press twice less than 1 second.
M
Display No. 3 will show l.3 (Alarm Setting Level).
Alarm Setting Level
alt1 Alarm 1 Type
Change the alarm
8 2 8: Absolute-Value
type with the U
l.3
and D keys.
M
Press for at least 1 second to return to Operation Level.
l .0
l.0
1. Refer to input type
list
(P. 4-10).
l.1
2. Refer to output
type list
(P. 4-21).
Dotted arrow
indicates that the key
is pressed several
times to switch to
desired parameter.
l.3
3. Refer to alarm
type list
Upper-Limit Alarm
(P. 4-38).