Omron E5AR-T User Manual page 299

Section 8 Parameters
Operation at Reset
Function
Setting
Set Point Selection
Function
Setting
Reference
Reference
8-62
rstm
• This parameter is used to set the operation at reset.
Setting range
stop
: Stop control
fsp
: Fixed control
If the Operation at Reset parameter is set to "Fixed
Control," control during reset is executed using the
Important
value set for the Fixed SP parameter. Control does
not stop.
spsl
• This parameter is used to select whether coordinated operation is
executed using the channel 1 present SP or the PV.
Setting range
psp
: Present set point
p?
: Present value
● Related Information
Operating Programs Using Multiple Channels in 5.2 Control
Functions (P. 5-11)
● Related Parameters
Set Point Offset (Adjustment Level) (P. 8-32)
Independent Operation/Coordinated
Setting Level) (P. 8-59)
Unit Default value
stop
: Stop control
Coordinated operation
Unit Default value
psp
: Present set point
Operation (Control
l.1
l.1
Initial