Omron E5AR-T User Manual page 258

CH
Program Repetitions
Program Link Destination
Function
Setting
Reference
Reference
rpt
link
• The Program Repetitions parameter is used to set the number of
times a program is to be repeated. The number of times the program
is executed will be the set value for this parameter + 1.
• The Program Link Destination parameter is used to set the link
destination for each program. Once a program has been completed,
the operation will continue with the program number specified for
this parameter.
Parameter
Program Repetitions 0 to 9,999
Program Link Destina- 0 to 32
tion (0: No program link)
● Related Information
Program Operations in 5.7 Program Operation Functions (P. 5-30)
8.4 Program Setting Level ( )
CH1 or CH2 for independent operation
Setting range Unit
times
-
Default value
0
0: No link
8-21