Omron E5AR-T User Manual page 62

Control is stopped in following levels: Input Initial Settings, Control
Initial Setting, Control Initial Settings 2, Alarm Settings, Display
Adjustment, Communications Settings, Advanced Function Settings,
Expansion Control Settings and Calibration. Control will stop on all
channels as soon as you move to any of these levels.
Display No. 3 shows the current level. The characters and the corre-
sponding levels are as follows:
Display
No. 3
l.prt
l p r t
Not lit *1
Not lit *1
l.adj
l.ad2
l.alm
l.pid
Not lit *2
l.tec
l.mon
l.0
l.1
l.2
l.3
l.4
l.5
l.adf
l.exc
l.cal
*1 The program number and segment number are displayed.
*2 The program number and ts are displayed.
4.1 Setting Levels and Key Operations
Level
Protect Level
Operation Level
Program Setting Level
Adjustment Level
Adjustment 2 Level
Alarm Set Setting Level
PID Setting Level
Time Signal Setting Level
Approximation Setting Level
Monitor Item Level
Input Initial Setting Level
Control Initial Setting Level
Control Initial Setting 2 Level
Alarm Setting Level
Display Adjustment Level
Communications Setting Level
Advanced Function Setting Level
Expansion Control Setting Level
Calibration Level
4-5