Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
This chapter describes how to configure access control.
18.1 About Access Control
Click Advanced Application and then Access Control from the navigation
panel to display the screen as shown. From this screen you can configure SNMP
and enable/disable remote service access.
Figure 54
18.2 Access Control Overview
A console port session and a Telnet session cannot coexist. The console port
has higher priority. If you telnet to the MSAP2000 AAMS and someone is
already logged in from the console port, then you will see the following
message.
Figure 55
"Local administrator is configuring this device now!!! Connection to
host lost."
A console port or Telnet session can coexist with one FTP session, a web
configurator session and/or limitless SNMP access control sessions.
Table 42
CONSOLE PORT
The console port and Telnet share one
session. The Console port has the highest
priority and Telnet has the lowest priority.
Access Control
Console Port Priority
Access Control Overview
TELNET
C
H A P T E R
Access Control
FTP
WEB
One session
Up to five accounts
115
1 8
SNMP
No limit
Advertisement
Table of Contents
