Table of Contents
Advertisement
8B-10 LIGHTING SYSTEM
1
2
3
2
1
1
Light Control Switch Combination Unit
Removal and Installation
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove dash side trim (1) and steering column hole cover
(2).
3) Remove combination meter (2) referring to "Combination
Meter Removal and Installation" in this section.
4) Remove side ventilation louver (3) referring to "Side Ventila-
tion Louver Removal and Installation" in Section 1A.
5) Remove light control switch combination unit (1) from instru-
ment panel
6) Disconnect connector from light control switch combination
unit.
INSTALLATION
Reverse removal procedure for installation.
Advertisement
Table of Contents
