Table of Contents
Advertisement
1
1
1
2
3
6) Remove door trim bracket (1).
7) Remove door sealing cover (2).
2
8) Remove rear door outer garnish (1).
9) Remove outer weather-strip (2). Do not deform it when
removal.
Lower window all the way down. Then, use a tape-wrapped
2
putty knife (or screwdriver) to pry off outer weather-strip.
10) Detach rear part of glass run (1) from door sash (2).
3
11) Remove door sash (2).
12) Remove door glass (3) as shown in figure.
INSTALLATION
Reverse removal procedure to install door glass noting the follow-
ing instructions.
• Fit bottom channel (1) on glass bottom end as shown in fig-
ure.
Glass fitted position of bottom channel
"a": 201.9 – 204.9 mm (7.95 – 8.07 in.)
• Tighten bottom channel attaching screws. Tighten rear
screw first, and then tighten front screw.
BODY SERVICE 9-11
Advertisement
Table of Contents
