Table of Contents
Advertisement
9-28 BODY SERVICE
2
3
"A"
1
Hood Removal and Installation
REMOVAL
"B"
4
4
4
"B"
INSTALLATION
Reverse removal procedure to install hood noting the following
instruction.
"A"
Hood Adjustment
Adjust the following point:
(a)
1
(a)
CAUTION:
Place cloth on "A" in figure to prevent from any damage.
1) Remove window washer hose (1) from hood (2).
2) Remove cowl top garnish (3).
3) Remove 4 mounting bolts (4) to detach hood (2).
• Apply sealant to contact face "B" of hood hinge (4).
"B": Sealant 99000-3110
• Hood position adjustment.
Fore-and-aft and right-and-left adjustment.
Adjust hood clearance by loosening hood mounting bolts,
refer to "Panel Clearance" in this section.
• Vertical adjustment
If only one side (right or left) of hood is not level with front
fender, make it level by tightening or loosening hood cushion
(1).
• Hood lock position adjustment
When installing hood lock (1), bring bolt at highest position
and move it in vertical direction for adjustment free from
loose to hood striker.
Tightening torque
Hood latch bolts (a): 10 N·m (1.0 kg-m)
Advertisement
Table of Contents
