Table of Contents
Advertisement
Intermediate Shaft Disassembly and Assem-
bly
Disassembly
1) Remove reduction drive oil seal (1) using special tool.
Special tool
(A) : 09913-50121
2) Remove snap ring (3) from right case (2) using special tool,
and drive out intermediate shaft (1).
Special tool
(A) : 09952-76011
3) Drive out intermediate right bearing (1) from intermediate
shaft (2) using bearing puller (3) and press (4).
4) Remove intermediate center oil seals (1) using press and
special tools.
Special tool
(A) : 09924-84510-005
(B) : 09913-75821
TRANSFER 7D-15
Advertisement
Table of Contents
