Table of Contents
Advertisement
10B-54 AIR BAG SYSTEM
Special tool
(A): 09932-76010
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble code (Refer to "Diagnostic Trouble Code (DTC) Clearance"), if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.
DTC B1076 – Wrong Side Sensor (Driver Side) ID
DTC B1077 – Wrong Side Sensor (Passenger Side) ID
DTC WILL BE SET WHEN
DTC B1076 or B1077:
SDM receive wrong ID (Part No.) signal from side sensor.
NOTE:
• Be sure executing items below, be sure to perform "Air Bag Diagnostic System Check".
• Confirm the part number of side sensor which is installed.
1) Ignition switch OFF.
2) Replace side sensor.
3) Repeat "Air Bag Diagnostic System Check".
Advertisement
Table of Contents
