Table of Contents
Advertisement
• Passenger air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check trim cover for cracks or deformities.
– Check harness and connector for damage or tightness.
If any faulty condition is found in above checks, replace.
• Air bag wire harness and connections
– Check for damages, deformities or poor connections.
(Refer to "Intermittents and Poor Connections".)
– Check wire harness clamps for tightness.
If any faulty condition is found, correct or replace.
• Seat belt pretensioner
– Check for dents, cracks, damage or fitness.
– Check connector for damage or tightness.
If any faulty condition is found in above checks, replace.
• Seat belts and mounting points
– Refer to "Front Seat Belt Inspection" in Section 10.
• "AIR BAG" warning lamp
– After vehicle is completely repaired, perform "Air Bag Diag-
nostic System Check".
• Side air bag (inflator) module (1) (driver and passenger side)
– Check front seat back for rent or damage.
– Check wire harness and connector for damage or tight-
1
ness.
If any faulty condition is found in above checks, replace front seat
back.
AIR BAG SYSTEM 10B-71
Advertisement
Table of Contents
