Table of Contents
Advertisement
10B-88 AIR BAG SYSTEM
[A]
1
1
[B]
2
[C]
[D]
4
2
3
5
2
1
Deployment/Activation Inside of Vehicle
When the vehicle will be destroyed, or salvaged for component
parts, deploy the air bag modules and/or activate seat belt preten-
sioners installed on vehicle.
1) Turn ignition switch to "LOCK" position, remove key and put
on safety glasses.
2) Remove all loose objects from front seats and instrument
panel.
3) Disconnect air bag (inflator) module or seat belt pretensioner
connector as follows.
• For driver air bag (inflator) module:
Disconnect contact coil connector (1) located near base of
steering column.
• For passenger air bag (inflator) module:
Remove glove box from instrument panel and disconnect
passenger air bag (inflator) module connector (2).
• For side air bag (inflator) module:
To turn over driver and passenger side back trims (5) and
disconnect side air bag (inflator) module connectors (3).
• For seat belt pretensioner:
Remove both side (driver and passenger side) center pillar
lower trims and disconnect seat belt pretensioner connectors
(4).
4) Confirm that each air bag (inflator) module and/or seat belt
pretensioner is securely mounted.
[A]: Driver air bag (inflator) module
[B]: Passenger air bag (inflator) module
[C]: Side air bag (inflator) module
[D]: Seat belt pretensioner
Advertisement
Table of Contents
