8D-28 WINDOWS, MIRRORS, SECURITY AND LOCKS
[A]
[B]
[C]
Key Cylinder Switch Inspection
1) Disconnect negative (–) cable at battery.
2) Remove front door lock assembly referring to "Front Door
3) Inspect continuity between terminals under the following key
If check result is not as specified, replace door lock assembly.
Key cylinder switch specification
Right side switch terminals
Left side switch terminals
a b c d e f
Key position
Lock Assembly Inspection" in Section 9.
position.
Neutral
Unlock
Lock
[A]: Lock
[B]: Neutral
[C]: Lock
a
b
f
e
c
d