Table of Contents
Advertisement
10B-38 AIR BAG SYSTEM
[A]
(A)
(C)
(B)
STEERING WHEEL
[A]: Fig. for STEP 1 and 2
[B]: Fig. for STEP 2
[C]: For DTC B1041
[D]: For DTC B1045
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932-78310
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to "Diagnostic Trouble Code (DTC) Clearance"), if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.
DTC B1042 or B1046:
Step
1
1) With ignition switch OFF, remove center pil-
lar inner garnish of applicable side then dis-
connect seat belt pretensioner connector.
2) Check proper connection to applicable seat
belt pretensioner at terminals in "L22" or
"L23" connector.
3) If OK, then connect Special Tool (A), (B)
and (C) to seat belt pretensioner connector
disconnected at the step 1.
With ignition switch ON, is DTC B1042 or
B1046 still current?
[B]
[C]
"L22", "L23"
Action
(A)
"L21-33" "L21-34"
(A)
Yes
Go to step 2.
[D]
"L21-35" "L21-36"
(A)
Ignition switch OFF.
Replace seat belt preten-
sioner (Refer to 10).
(A)
No
Advertisement
Table of Contents
