Suzuki Ignis Service Manual page 3875

9-54 BODY SERVICE
Floor Carpet Removal and Installation
1. Floor carpet
2. Dash panel silencer
3. Silencer seat
REMOVAL
1) Remove front seats and rear seat cushion.
2) Remove seat belt lower anchor bolt. Refer to "Front Seat Belt Removal and Installation" in Section 10.
3) Remove dash side trims, front side sill scuffs, center pillar inner lower trims, quarter inner trims and rear side
sill scuffs.
4) Remove parking brake lever cover and console box.
5) Remove floor carpet.
INSTALLATION
Reverse removal sequence to install front floor carpet, noting the following instruction.
• For tightening torque of seat belt anchor bolt. Refer to "Front Seat Belt Removal and Installation" in Section
10.
Ignition switch lock cylinder removal and installation
Refer to "Steering Column Removal and Installation" in Section
3C.
ELECTRICAL DIAGNOSIS
For ignition switch electrical troubleshooting, refer to "Ignition
Switch Removal and Installation" in Section 8.
Exterior and Interior Trim