Table of Contents
Advertisement
Clutch Cover, Clutch Disc and Flywheel Components
1. Flywheel
2. Flywheel bolt
3. Clutch release shaft seal
: Apply grease 99000-25010 to seal lip. (0.3 g (0.01 oz))
4. Clutch release shaft No.2 bush
: Apply grease 99000-25010 to bush inside. (0.3 g (0.01 oz))
5. Return spring
6. Clutch release shaft
Apply grease 99000-25010 to the end of release shaft arm. (0.3 g
(0.01 oz))
7. Clutch release shaft No.1 bush
: Apply grease 99000-25010 to bush inside. (0.3 g (0.01 oz))
Unit Repair Overhaul
Clutch Cover, Clutch Disc and Flywheel
Removal and Installation
Removal
1) Dismount transaxle assembly referring to "Transaxle Unit
Dismounting and Remounting" in Section 7A1.
2) Hold flywheel transaxle with special tool (A) and remove
clutch cover bolts (1), clutch cover (2) and clutch disc.
Special tool
(A) : 09924-17810
8. Release bearing
: Apply grease 99000-25010 to joint of bearing and release shaft
and also bearing inside. (0.3 g (0.01 oz))
9. Clutch cover
10. Clutch disc
11. Clutch cover bolt
Tightening torque
Do not reuse.
CLUTCH 7C1-9
Advertisement
Table of Contents
