Suzuki Ignis Service Manual page 3850

Front Fender Removal and Installation
2
1. Front fender lining 2. Front fender
Hood Inspection
Check that hood opens and closes smoothly and properly. Lubri-
cate if necessary. Also check that secondary latch operates prop-
erly (check that secondary latch keeps hood from opening all the
way) and hood locks securely when closed.
Adjust hood locks position if necessary.
"A"
REMOVAL
1) Remove front bumper.
2) Remove headlight assembly. Refer to "WARNING" in Sec-
tion 8.
3) Disconnect side turn signal lamp connector.
4) Remove front fender lining.
5) Remove front fender.
INSTALLATION
Reverse removal procedure to install front fender noting the fol-
lowing instructions.
• If paint on fender bolt is peeled off, be sure to apply paint
again.
• Adjust panel clearance referring to "Panel Clearance" in this
section.
BODY SERVICE 9-29
1
"A"